STREET STOCK

A. Limited to American cars only. No compacts, convertibles, sports cars, pick up trucks or station wagons.
B. Outside appearance must be stock.
C. All glass and flammable material must be removed.
D. Headlights, taillights and wheel covers must be removed.
F. Doors may be hulled.
G. Doors must be strapped, welded or bolted.
H. Fenders may be cut for tire clearance.
I. Front wheel wells may be removed.
J. Area between driver and gas tank must be totally covered with sheet metal.
K. Window openings may not be covered with any material.
L. Bumpers must be stock for make and model and be securely attached. No exposed edges, and be approved by track.
M. Must have lifting hook for wrecker.
N. Must display cubic inch and weight on hood.
O. An 8" spoiler is permitted

FRAME
A. Must be stock for make and model.
B. Loop around engine compartment permitted.
C. Two bars may run from top of main roll cage loop to rear frame rails.
C. Wheelbase must be stock for make and model.
E. Steering must be stock for make and model.

FUEL
A. Racing fuel permitted. No alcohol.
B. Electric fuel pumps not permitted.
C. Nitrous oxide, superchargers or turbochargers are not permitted.
D. Fuel cell recommended.

RADIATORS
A. Stock type or aluminum radiators allowed.

STARTERS
A. All cars must start under its own power.

WEIGHT
A. Up to 362 cubic inches, must weigh 3,000 pounds.
B. 602 sealed crate engines legal weight 3,000 pounds

SUSPENSION
A. Must be stock for make and model.
B. Racing spring permitted, 5" minimum. Stock racing shocks permitted, must have stock mounts. One shock per wheel.
C. Cars with coilspring rear suspension may run wedge screws on rear wheels only.
D. aftermarket control arm bushings permitted aftermarket balljoints permitted.
ENGINE
A. Must be stock for make of car.
B. No high performance equipment.
C. Must be in original location.
D. Maximum of 0.60 overbore permitted.
E. Cam not to exceed 450 lift at valve.
F. Hydraulic flat tapped cams only.
G. Small block Chevy and Ford engines only.
H. Stock intake manifold for make of car. 4 hole, no modification. Low Rise Dual Plane aluminum manifolds allowed. No porting or polishing of manifolds. No high rise of any kind.No modifications in intakes on sealed crate engines
I. Heads must be stock for make. No high performance and no angle plug heads, no double hump heads, and no 041 heads. Valve 1.94 and 1.50 is the max.
J. NO VORTEC HEADS!!except on sealed crate motors
K. No angle cut heads. Three (3) valve job permitted.
L. Stock Rocker arms No roller rockers or roller tip rocker arms
M. No stud girdles or shaft rockers except for engines that come OEM.

FLY WHEEL AND CLUTCH
A. Stock steel flywheel only. No high performance fly wheels. Fly wheel must weigh no less than 14 pounds.
B. Pressure plate and clutch must be stock, for make and model-10" minimum diameter on clutch.

CARBURETOR
A. One 4 BBl Holley 600 single line (Holley part#1850)
Choke mechanism may be removed but choke tower must remain and display factory Holley part#, any altering of choke tower or part # will result in disqualification.
CARB. SPACER/ADAPTOR
A. One 1" spacer/adaptor will be permitted and must be made of matallic material.
NO part of adaptor/spacer may protrude into intake manifold
CARBURETOR/ OPTION2
O.E.M. Quadrajet Carbs Legal
IGNITION
A. Factory single point or HEI only. Stock coil only. No ignition boosters. 4-pin module. NO MSD OR ACCEL PERMITTED.

EXHAUST
A. Headers allowed. No porting and polishing.
B. Stock three, four or five speed. Must have working forward and reverse gears.
C. Automatic transmission permitted. Must have torque converter. No modifications.

REAR ENDS
A. Must be stock for make and model. Rear ends may be locked          B Stock Type 9" Ford May be used No afternarket housings,No nodular 3rd members, stock type axles (no aftermarket axles) May use mini spool No full spool.

BRAKES
A. Must be stock for make and model. Must be operational four wheel braking system.

WHEELS AND TIRES
A. 10" steel wheels maximum. Over sized lug nuts mandatory.
B. Hoosier spec 21, spec 1350, spec 55, spec 1600

Street Hobby protest rules are the same as Modified Hobby protest rules.